|Product Name:||Portable Indoor Bleachers||Size:||Customized|
Plywood Plastic Telescopic Bleacher Seating,
Telescopic Bleacher Seating With Safety Railings,
Plywood Plastic portable indoor bleachers
Portable Retractable Bleacher With Safety Railings For Chorus
Material of portable outdoor bleacher
The chair surface adopts the hollow blow molding manufacturing process, and selects high-density polyethylene material, which is processed and formed at one time. The seat surface has rounded edges and corners, high bonding strength at the junction, and excellent aging resistance and impact resistance.
Features of portable outdoor bleachers
1. Stand support is cold-drawn and formed of excellent carbon steel plate, which can increase the strength and toughness of the material, improve the mechanical properties of the material, and enhance the stability of the structure. Due to the various sizes of the stands, the final size is determined by the size of the actual venue and the type of seats. The seat width and low back seats of the stands are 700mm, and the floor height is 300mm. The stands are completely covered, especially the two sides are covered with 3mm thick steel plates, the surface connection and painting are completely smooth, and the final effect surface is a whole. The back of the stand is arranged with honeycomb aluminum panels, and the bottom counter board is used. The finished aluminum plate retains the "mirror" polishing effect.
2. Cart and load-bearing wheels: The cart includes a 100×50×3mm column, 130×50×3mm feet, and is equipped with an anti-bending system with anti-friction bearing components. The load-bearing wheel adopts a wide wheel, and the large caster wheel adopts an outer high-strength polyurethane PU wheel with a diameter of 125mm and a spoke of B=40mm. It has sufficient load-bearing strength and appropriate elasticity. The inner layer adopts double ball bearings and the middle is The nylon layer is covered with a high-toughness and wear-resistant polyurethane layer, which can withstand heavy loads and can rotate flexibly, with little friction, and does not damage the wooden floor. The wheels of the stands are distributed in multiple rows, and each row is uneven, which can reduce the stand against the wooden floor. The stress can prolong the service life of the wooden floor.
3. Load-bearing beam: The size of the load-bearing beam is 50×40×3mm, 100×50×3mm, which is installed at a center distance of about 70cm and welded between the main beam and the auxiliary beam. The cold-rolled steel plate with sufficient bearing capacity is used, and after folding, it is sprayed to make it not only has good corrosion resistance, but also has a smooth and clean outer surface. The secondary beam has a size of 50×35×2 and serves as the end element for all wooden support arms and walking surfaces. The supporting arms between the supporting frames are applied to the main beam to eliminate sliding friction and lubricate the rollers and nails through the action of the mechanical surface.
4. Stand strength Stand structure strength: static load ≥200kg per seat; impact resistance strength of bed frame: static load ≥200kg per seat.
The middle load of each layer is ≥80kg, and the height of 300mm is not deformed. The overall structure is stable under dynamic load, and the bearing surface is not deformed.
5. Plastic spraying All the metal parts that make up the telescopic stand are pickled. Phosphating treatment is then carried out at a temperature of 60 degrees to ensure that the surface has an anti-corrosion protection effect. The last spraying procedure is to oxidize the powder coating through electrostatic spraying, which is carried out at 190 degrees for about 20 minutes. The color is determined by the project manager, and all screws and nuts are standard parts.
|Material||Chair: HDPE chair|
|Structure Frame: Cold roll steel dealt with powder coating or galvanization|
|Flooring: galvanized steel sheet Or alumium floor|
|Safety Railing: Steel with powder coating or Stainless steel is optional|
|Chair Type||Bench, Bucket chair, Foldable chair|
|Installation Type||Floore mounted type or Rise mounted type|
|Color of Steel Structure||Black or Grey|
|Railings||Safety Railing on two sides of the bleacher, backside railing is optional|
|Stair Step Width||800-1000mm|
|Packing||PP woven bag, Carton, Air bubble film|
|MOQ||100 seats per set|
|Delivery Time||25-30 days according to the quantity|
Stadium, Race court,court for event
Why Choose Us?
Honest merchants: We insist on strict control of product quality, rely on quality to expand the market, and encourage technological innovation.
Quality Assurance: Over the years, we have been trusted by customers with stable products, timely delivery, and excellent after-sales service. We have a broad market and a good reputation.
Price commitment: In order to ensure the reliability of the product, all materials selected are high-quality steel. Under the same competitive conditions, on the basis of not reducing the technical performance of the product, we will sincerely provide it at a preferential price.
1.Can you do OEM?
Yes, we do OEM according to clients’ requirements.
2.What’s your lead time?
It’s according to the quanity. Usually 25-30 days based on MOQ quantity.
2.Can you provide samples?
Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.
4.What’s your delivery port?
From Chongqing, Shanghai, Guangzhou or Shenzhen
5.What’s your payment terms?
TT transfer is preferred.
6.Do you have color choice?
Yes, we have multi colors for the clients.