|Material:||Q235 Steel,Metal，HDPE||Color:||Customized Color|
|Size:||Customized Size||Packing:||KD, Air Bubble Film|
|Product Name:||Telescopic Bleacher Seating Chairs,conference Hall Bleacher||Key Words:||Bleacher / Retractable Bleacher / Bleacher Seats,Retractable Chair|
|Installation:||Floor Mounted||Chair Material:||Foam And Fabric|
|Chair Type:||Folding Chair|
OEM Soft Cushion Telescopic Bleacher Seating,
OEM Soft Cushion Tribune Seating,
Tribune Seating W900mm Step
Soft Cushion Floor Mounted Chair Telescopic Tribune Seating
Feature: Most of the telescopic tribune seating are placed in the conference hall, auditorium hall and stadium, gym, or some pubilc sport center. It can be closed and opened by electric control.
The design requirements of the Telescopic Bleacher Seating
(1) In addition to the weight of the seat itself, the grandstand also satisfies the load: the dynamic load per square meter is 450kg; the length of each meter can bear the left and right swing load 36kg.
(2) The guardrail design meets the following horizontal forces: the top can withstand 65kg per meter, and the middle of the guardrail can withstand 135kg per meter
(3) The Telescopic Bleacher can withstand a rated load of 200 kg per seat.
(4) There are safe railings on both sides of the telescopic bleacher, and the surface is dealt with powder coating, the type of railing could be chosen wit plugged type or unplugged type.
(5) The front of the retractable bleacher has a beautiful appearance, and there are anti-skid strips on the bleacher to prevent the audience from slipping up and down.
System material description of the Telescopic Bleacher Seating
(1) Casters: The inner layer adopts double ball bearings, the middle is a nylon layer, and covered with a high toughness time-grinding polynitrogen layer, which can withstand great force without wearing the floor.
(2) The driving wheel has multiple reinforced rubber structures, which can easily overcome ground defects.
(3) Travelling wheel frame: The number of Travelling wheel frame in each row can be set according to the size and requirements of the site. Each Travelling wheel frame is equipped with 4 casters.
(4) Bleacher structure: It adopts a composite structure, and the material is alloy steel. There must be no welding in the middle of the rods of all load-bearing parts. The thickness of the supporting steel plate is> 3mm, which is connected by high-strength positioning profiles. It can increase the strength and toughness of the material, improve the mechanical properties of the material, and enhance the stability of the structure. The size of the load-bearing beam is 50x40x3, the column is 100x50x3, and the main beam is made of 190×50×3 inner coiled profile at one time, and national standard high-strength bolts are used for on-site riveting (all screws and nuts are standard parts), which improve the previous welding disadvantages. Not only has a good corrosion performance and stability, but also has a smooth and clean outer surface.
The cantilever beam adopts 60×40×3.0 inner coiled profiles, which are the main structural elements for the wooden flooring. The support parts between the support frames can also be used for the main beam to eliminate sliding friction.
(5) Pedal: It is made of 18mm thick high-strength laminate composite fireproof board.
(6) The front frame adopts special aluminum-titanium alloy edging and special anti-skid lines to increase the strength of the frame and prevent the audience from slipping while walking. Compared with the general inlaid rubber and plastic strips, it has some advantages such as wear, no aging, no slippage.
(7) Synchronous telescopic device: It is composed of a synchronous shaft, a transmission chain and a side roller to ensure a balanced linear motion during expansion and braking.
(8) Bleacher seats: HDPE plastic chairs, using high-density polyethylene materials, with low back rest or folding backrest. Soft cushion chairs use high density cold molded foam and high quality fabric.
(9) The steel components are all pickled and phosphated and then powder coating on the automatic spraying line to enhance their corrosion resistance.
Telescopic Tribune Seating
|Material||Chair: Cold molded foam chair|
|Structure Frame: Cold roll steel dealt with powder coating,grey color|
|Flooring: 18mm plywood with anti-slip finish or covered by carpet, Or alumium floor|
|Safety Railing: Steel with powder coating or Stainless steel is optional|
|Chair Type||Foldable chair|
|Installation Type||Floore mounted type|
|Operation||Wire control or remote control (Moterized type)|
|Color of Steel Structure||Black or Grey|
|Railings||Safety Railing on two sides of the bleacher, backside railing is optional|
|Stair Step Width||800-1000mm|
|Packing||PP woven bag, Carton, Air bubble film|
|MOQ||100 seats per set|
|Delivery Time||25-30 days according to the quantity|
|Application||Stadium, Conference Hall, Theatre, etc.|
Applicable places: suitable for indoor and outdoor sports fields, playgrounds, large, medium and small gyms, school basketball courts, football fields, badminton courts, multi-functional auditoriums, TV studios, theaters, cinemas, temporary performance venues, equestrian fields, Playground etc. The overall structure is firm, the load-bearing performance is good, one thing is multi-purpose, it can be opened when used, and can be put away when it is not used, which can save space to a greater extent and increase the use space of the site.
1.Can you do OEM?
Yes, we do OEM according to clients’ requirements.
2.What’s your lead time?
It’s according to the quanity. Usually 25-30 days based on MOQ quantity.
2.Can you provide samples?
Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.
4.What’s your delivery port?
From Chongqing, Shanghai, Guangzhou or Shenzhen
5.What’s your payment terms?
TT transfer is preferred.
6.Do you have color choice?
Yes, we have multi colors for the clients.