|Music Hall Auditorium Seating
|Fabric,Metal,Aluminum/Sponge / Plywood/Fabric
|High Quality Auditorium Chair,Theater Auditorium Hall Chair,cheap Church Chairs For Sale
Fixed Auditorium Seating Fire Retardant,
PP Shell Foam Fixed Auditorium Seating,
Fire Retardant red auditorium seats
PP Shell Cushion Fixed Folding Auditorium Chairs With Tablet
Feature of Folding Auditorium Chairs
The back of the seat is made of special fabric, which can be flame-retardant, stain-resistant, non-spontaneous, non-fading and safe.
Backrest and seat cushion are made of stereotyped sponge, steel spraying fixed feet, built-in flip-type triamine writing board, solid wood armrest surface, seat/back board, hemp/velvet fabric finish, spring return mechanism
Chair seat structure: It adopts a reinforced connection structure, a reinforced horizontal tube is installed between the two back corners, and a shock-proof rubber pad is installed at the rear of the seat bag, so that the stress point is no longer sponge when the seat collides with the back under external force. It is more durable, firmer and more comfortable.
The side plate is made of plastic ABC by injection molding, and it will never be deformed. The surface is pasted with imported hemp, which is beautiful and neat.
Writing board: It can be set as front type and back type. The front type writing board panel is made of ABS composite material and formed by injection molding at one time. The shaft adopts a special fixing device, and the support palm connecting piece is aluminum alloy injection molding. The rear writing board, the panel is a fireproof board, and the bracket is made of 3 mm thick cold-rolled steel stamped with folding function.
|Music Hall Auditorium Seating
|Arm: Wooden cover and steel frame or PU armrest or aluminium
|Leg: Cold roll steel dealt with powder coating or aluminum leg
|Backrest and seat cushion: cold molded foam with plywood cover backrest and seat or PU cover
|Tablet: MDF/ABS are optional
|Fabric: Standard Ployester, fire retardant is optional
|Seat Folding mechanism
|Spring Return or Gravity Return Mechanism
|Postion of tablet
|Installed on the armrest or backrest
|30 days according to the quantity
|Conference Hall, Music Hall, Theatre,Assembly hall,etc.
The seat row spacing should meet the following requirements:
A. Short row method: Hard chairs should not be less than 0.80m, soft chairs should not be less than 0.90m, the stepped ground row spacing should be appropriately increased, and the horizontal distance from the back of the chair to the most prominent part of the back row should not be less than 0.30m;
B. Long row method: Hard chairs should not be less than 1.00m; soft chairs should not be less than 1.10m. The stepped ground row spacing should be appropriately increased, and the horizontal distance from the back of the chair to the most protruding part of the rear row should not be less than 0.50m;
C. When setting up seats against the back wall, the distance between the last row of seats on the floor and pool seats should be increased by at least 0.12m.
The number of seats in each row should meet the following requirements:
A. Short row method: When there are aisles on both sides, it should not exceed 22 seats, and when there are aisles on one side, it should not exceed 11 seats; when the limit is exceeded, the row spacing will increase by 25mm for each additional seat;
B. Long row method: There should be no more than 50 seats when there are walkways on both sides, and no more than 25 seats when there are walkways on one side.
The auditorium should reserve wheelchair seats for the disabled. The seats should be 1.10m deep and 0.80m wide. The location should be convenient for the disabled to enter and evacuate, and the internationally accepted signs should be set up.
The slope of the slope is not more than 1:6.
Ramp seats cannot be arranged in an arc.
There are horizontal walkways, and the rear row should not exceed 10 rows.
The vertical and horizontal walkways should not be less than 1.2 meters.
1.Can you do OEM?
Yes, we do OEM according to clients’ requirements.
2.What’s your lead time?
It’s according to the quanity. Usually 25-30 days based on MOQ quantity.
3.Can you provide samples?
Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.
4.What’s your delivery port?
From Chongqing, Shanghai, Guangzhou or Shenzhen
5.What’s your payment terms?
TT transfer is preferred.
6.Do you have color choice?
Yes, we have multi colors for the clients.
Why Choose Us?
Honest merchants: We insist on strict control of product quality, rely on quality to expand the market, and encourage technological innovation.
Quality Assurance: Over the years, we have been trusted by customers with stable products, timely delivery, and excellent after-sales service. We have a broad market and a good reputation.
Price commitment: In order to ensure the reliability of the product, all materials selected are high-quality steel. Under the same competitive conditions, on the basis of not reducing the technical performance of the product, we will sincerely provide it at a preferential price.