|Theater Auditorium Hall Chair,School
|High Density Molded Foam
|Commercial Furniture,Auditorium Folding Chair,Cinima Chair,School Chair
|Treatment Of Stell:
ISO14001 Certified Folding Auditorium Chairs,
ISO14001 Certified folding theater seats,
ISO14001 Certified folding cinema seats
Gold Cover Back Foldable Tablet Steel Folding Auditorium Chairs
Features of folding auditorium chairs
Seat back panel: plastic seat back panel made of high-quality imported bai virgin plastic. It has the advantages of no brittleness, no fading, no deformation, no aging, etc. In addition, the special sound-absorbing holes of the seat plate can effectively reduce noise and greatly improve the sound quality in the theater.
Armrest mechanism: Use high-quality solid wood. The surface treatment is made with the traditional craftsmanship of Taiwan Dabao paint with multiple bottoms and multiple sides. The lacquer is very smooth and smooth, and the hand feels fine.
Writing board: It adopts cast aluminum bracket, super long load-bearing, strong and durable, and the load-bearing requirement is higher than the industry standard. The surface of the writing board can be made of high-density medium-fiber decorative panels, which are paint-resistant, scratch-resistant, and wear-resistant, and are available in rich colors; multi-layer solid wood can also be used as the surface with high-quality paint.
Standing feet: Double standing feet made of high-quality steel. Beautiful, generous, traditional and stable, strong and durable.
Sponge: independently produced special foam sponge. Made of imported raw materials, it has high density, comfortable seating, good resilience, and does not collapse after sitting for a long time.
Fabric: Use high-quality linen fabrics, cotton and linen fabrics for public seats. It has the functions of flame retardant, dustproof, non-fading, abrasion resistance and dirt resistance.
Spraying: The steel parts have been repeatedly degreasing-pickling-neutralization-surface adjustment-coating-crystallization-electrostatic spraying. The surface is smooth and clean, and the spray is even. No peeling off the paint.
Rebound: Optional: counterweight rebound, spring rebound. Can quickly return the seat cushion to its original position.
|Arm: Wooden cover and steel frame or PU armrest or aluminium
|Leg: Cold roll steel dealt with powder coating or aluminum leg
|Backrest and seat cushion: cold molded foam with plywood cover backrest and seat or PU cover
|Tablet: MDF/ABS are optional
|Fabric: Standard Ployester, fire retardant is optional
|Seat Folding mechanism
|Spring Return or Gravity Return Mechanism
|Postion of tablet
|Installed on the armrest or backrest
|30 days according to the quantity
|Conference Hall, Music Hall, Theatre,Assembly hall,etc.
Process of inspection
1. Auditorium chair theater chair inspection content
1.1 Seat size: seat pitch, chair height, chair depth, seat height.
1.2 The overall appearance of the seat: soft pack, spray, paint.
1.3 Seat turning noise and rebound situation.
1.4 The operation of the reversible backplane is flexible and firm.
1.5 Lifting and pushing of movable feet.
1.6 Installation and turnover of the coffee table board or writing board.
1.7 Adaptation and firmness of various fasteners.
2. Auditorium chair theater chair inspection method
2.1 Sampling 2% of each batch of products, and conduct trial assembly as required, but install at least two or two groups.
2.2 The appearance of the seat after assembly is determined by observation.
2.3 Measure the seat pitch, seat height, seat depth and seat of all installed seats.
2.4 The seat cushion flipping noise test, each flipping frequency shall not be less than five times.
2.5 Flexibility and reliability test can be turned back, each group shall not be less than three times.
2.6 The lifting and pushing test of movable foot universal wheels shall not be less than three times per group.
2.7 Operation flexibility and reliability test of coffee table and writing board, no less than three times per person.
1.Can you do OEM?
Yes, we do OEM according to clients’ requirements.
2.What’s your lead time?
It’s according to the quanity. Usually 25-30 days based on MOQ quantity.
3.Can you provide samples?
Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.
4.What’s your delivery port?
From Chongqing, Shanghai, Guangzhou or Shenzhen
5.What’s your payment terms?
TT transfer is preferred.
6.Do you have color choice?
Yes, we have multi colors for the clients.