Red Foldable Q235 Steel Retractable Seating System / Telescoping Bleachers

Red Color Foldable Stadium Seat HDPE Chair Retractable Gym Bleachers

Feature:The telescopic grandstand system could save the space where you need to carry out multiple events in the limited area.

When bleachers are stretched out, the outstretched chairs on the steps enable spectators to sit on comfortably and enjoy a visual feast.

Power supply: Wires and remote control will be provided for the need of the Retractable Gym Bleachers

System material description of telescopic bleacher seating

(1) Casters: use wide PU wheels. The inner layer adopts double ball bearings, the middle is a nylon layer, and then is covered with a high toughness and wear-resistant polyurethane layer, which can withstand huge forces without wearing the floor.

(2) Driving wheel: There are multiple reinforced PU structures, which provide the driving friction required for the stands, which can easily overcome ground defects, meet the needs of the stands, and do not wear the floor.

(3) Telescopic travelling wheel frame: The number of travelling wheel frame each row can be set according to the size and requirements of the venue. Each travelling wheel frame is equipped with more than 3 casters. When rolling on the floor, it will not damage the floor and leave no rolling traces.

(4) Structure: It adopts composite structure, and the material is alloy steel. There should be no welding in the middle of the rods of all load-bearing members. The thickness of the steel plate of the supporting member is ≥2.5mm, which is connected by high-strength positioning profiles. It can increase the strength and toughness of the material, improve the mechanical properties of the material, and enhance the stability of the structure. The load-bearing beam size is 50×40×2.5, and the column is 100×50×3. It is installed at a distance of about 70cm from the center and welded between the main beam and the auxiliary beam. The cold-rolled steel plate with sufficient bearing capacity is used, and after folding, it is sprayed to make it not only has good corrosion resistance, but also has a smooth and clean outer surface. The national standard high-strength bolts are used for on-site riveting (all screws and nuts are standard parts) to change the disadvantages of previous welding, so that it not only has good corrosion resistance and stability, but also has a smooth and clean outer surface. The auxiliary beam adopts 60×40×2 inner coiled profile, which is used as the structural element of all the wooden support arms and the walking surface. The supporting arm between the supporting frames is applied to the main beam to eliminate sliding friction and lubricate the roller and nails through the action of the mechanical surface.

(5) Movable step: The movable step keel is welded with high-quality carbon steel profiles to form a support, and the pedal is made of 17mm thick high-strength laminated composite solid wood board and 1mm thick melamine wear-resistant board. The surface layer is fixed by rivets and auxiliary stands of the stands to ensure the high strength and structural stability of the movable steps.

(6) Frontier: It adopts special aluminum-titanium alloy edging and special anti-skid lines to increase the strength of the bed frame and prevent the audience from slipping when walking. At the same time, anti-skid stripes are added to enhance friction and enhance safety factor.

(7) Synchronous telescopic device: adopts double-layer guide design, each driving device is connected by rigid shaft, and the stand support structure adopts mechanical feedback type synchronous telescopic device to ensure the synchronization of extension and retraction without directional deviation. The walking wheels of the stands are made of fixed-pull profiles and guided chutes are designed. Synchronous pulley guiding mechanisms are added to the upper layer of each group of stands every meter to ensure balanced linear movement during expansion and braking, and movement without noise.

(8) Retractable bleacher seating seats:

Seat: It is a hollow blow-molded front folding plastic flap chair. The overall design of the seat conforms to ergonomic principles and adopts front installation. Each floor of the stands is 800mm wide, 350mm high, and the seat installation center distance is 500mm. Drive mode is electric drive, using wireless remote control or wired handle control. The chair surface adopts hollow blow molding manufacturing process, and high-density polyethylene material (HDPE) is selected for one-time processing and molding. It has the characteristics of rounded edges and corners on the seat surface, relatively concentrated molecular weight, high bonding strength at the junction, excellent aging resistance, and excellent impact resistance. The surface of the seat is balanced, free from poor plasticization, cracks, holes, oil stains, deformation and other defects, uniform color, and no obvious color difference.

①. Overall dimensions of the chair surface: seat width × chair depth × chair back height = 440 × 560 × 500 (mm), the thickness of the seat wall is not less than 3mm.

② The seat can bear more than 200kg and is impact resistant.

③. Seat static load: the seat surface is loaded with more than 1600N, and the seat back is loaded with more than 760N.

④ Seat durability: The seat is loaded with 950N×200,000 times more than ten thousand times.

⑤ The seat is resistant to high and low temperatures: +75°C to -50°C. There are no appearance changes such as cracks, spots, blisters and obvious deformations, and no appearance changes such as local chalking cracks, spots, blisters and obvious deformations.

⑥. The service life of the seat>10 years.

(9) Stand aisle: Each floor is equipped with a box-shaped step (the craft is the same as that of the stand surface).

(10) Locking and handling system: The locking system uses equipment at the corner of the column and is designed to prevent the cart from moving.

(11) Plastic spraying: The steel components are all electrostatic sprayed on the automatic spraying line to enhance their corrosion resistance. The latter spraying procedure is to oxidize the powder coating by electrostatic spraying, at about 190 degrees for 20 minutes. The color is decided by the project manager.

Product customization process of Retractable Bleacher Seating

1. Consultation: initial communication to reach cooperation intention

2. Provide demand: determine the type of stand and seat style

3. Definite plan: design a reasonable plan and confirm

4. Sign the contract: quote and sign the production contract

5. Payment of deposit: collect deposit and schedule production

6. Delivery: delivery after payment of the balance

7. If there is demand, we can provide paid overseas installation

Why Choose Us?

Honest merchants: We insist on strict control of product quality, rely on quality to expand the market, and encourage technological innovation.

Quality Assurance: Over the years, we have been trusted by customers with stable products, timely delivery, and excellent after-sales service. We have a broad market and a good reputation.

Price commitment: In order to ensure the reliability of the product, all materials selected are high-quality steel. Under the same competitive conditions, on the basis of not reducing the technical performance of the product, we will sincerely provide it at a preferential price.

FAQ

1.Can you do OEM?

Yes, we do OEM according to clients’ requirements.

2.What’s your lead time?

It’s according to the quanity. Usually 25-30 days based on MOQ quantity.

2.Can you provide samples?

Yes, we could provide samples with the sample charge, but it will be refund if you place the mass production order.

4.What’s your delivery port?

From Chongqing, Shanghai, Guangzhou or Shenzhen

5.What’s your payment terms?

TT transfer is preferred.

6.Do you have color choice?

Yes, we have multi colors for the clients.